Complementary energy principle for large elastic deformation

Using the “base forces” as the fundamental unknowns to determine the state of an elastic system, the complementary energy principle for large elastic deformation is constructed for the conjugate quantities being displacement gradients, which possesses exactly the same form as that of classical linear elasticity. It is revealed that the complementary energy contains deformation part and rotation part.     

确定地下水污染强度的反问题方法

探讨了山东省淄博市张店区沣水南部区域地下水的硫酸污染问题 .根据观测井点的浓度数据 ,将硫酸污染强度的识别问题作为一个已知终值数据的源项反问题 .应用积分恒等式方法分析了未知源函数与已知数据间的数据相容性 ,进而基于最优化策略进行了数据反演 ,计算结果与实际估计值基本吻合     

Calculation of impulsively started incompressible viscous flows

The paper's focus is the calculation of unsteady incompressible 2D flows past airfoils. In the framework of the primitive variable Navier–Stokes equations, the initial and boundary conditions must be assigned so as to be compatible, to assure the correct prediction of the flow evolution. This requirement, typical of all incompressible flows, viscous or inviscid, is often violated when modelling the flow past immersed bodies impulsively started from rest. Its fulfillment can however be restored by means of a procedure enforcing compatibility, consisting in a pre‐processing of the initial velocity field, here described in detail. Numerical solutions for an impulsively started multiple airfoil have been obtained using a finite element incremental projection method. The spatial discretization chosen for the velocity and pressure are of different order to satisfy the inf–sup condition and obtain a smooth pressure field. Results are provided to illustrate the effect of employing or not the compatibility procedure, and are found in good agreement with those obtained with a non‐primitive variable solver. In addition, we introduce a post‐processing procedure to evaluate an alternative pressure field which is found to be more accurate than the one resulting from the projection method. This is achieved by considering an appropriate ‘unsplit’ version of the momentum equation, where the velocity solution of the projection method is substituted. Copyright © 2004 John Wiley & Sons, Ltd.     

多孔介质BISQ模型中的慢纵波

着重研究了多孔介质BISQ模型中慢纵波的基本特性.给出了BISQ模型下慢纵波速度 和衰减的低频近似公式.与Biot理论对比，BISQ模型中慢纵波的衰减随频率降低急剧增大， 且随喷射流长度的减小而增加；相速度随喷射流长度的减小而增加，其低频极限值不是零； 孔隙流体位移与固相骨架位移之比的幅值随喷射流长度的增加而减小，其相位特点与Biot模 型预测的不同；在流体与孔隙介质的边界上可产生更大的渗流.为对比，同时也给出快纵波 的行为.依据BISQ模型可推断：非黏滞流体饱和孔隙介质中不存在喷射流机理；BISQ模型中 关键词： 多孔介质 喷射流 慢纵波 动力协调     

Synthesis and morphology of polyethylene‐block‐poly(methyl methacrylate) through the combination of metallocene catalysis with living radical polymerization

Polyethylene‐block‐poly(methyl methacrylate) (PE‐b‐PMMA) was successfully synthesized through the combination of metallocene catalysis with living radical polymerization. Terminally hydroxylated polyethylene, prepared by ethylene/allyl alcohol copolymerization with a specific zirconium metallocene/methylaluminoxane/triethylaluminum catalyst system, was treated with 2‐bromoisobutyryl bromide to produce terminally esterified polyethylene (PE‐Br). With the resulting PE‐Br as an initiator for transition‐metal‐mediated living radical polymerization, methyl methacrylate polymerization was subsequently performed with CuBr or RuCl₂(PPh₃)₃ as a catalyst. Then, PE‐b‐PMMA block copolymers of different poly(methyl methacrylate) (PMMA) contents were prepared. Transmission electron microscopy of the obtained block copolymers revealed unique morphological features that depended on the content of the PMMA segment. The block copolymer possessing 75 wt % PMMA contained 50–100‐nm spherical polyethylene lamellae uniformly dispersed in the PMMA matrix. Moreover, the PE‐b‐PMMA block copolymers effectively compatibilized homopolyethylene and homo‐PMMA at a nanometer level. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3965–3973, 2003     

多室正交异性板箱形梁桥剪滞的半解析法

将带有纵向加劲肋的多室梯形箱形梁桥作为正交异性板折板结构考虑,采用艾瑞应力函数法给出了平面应力状态时正交异性板一般边界条件下的二维应力及位移的解析表达式一般形式。然后根据板梁在二者连接处的纵向线应变与侧向曲率两个形变协调条件解出了多室正交异性板箱形梁桥的应力分布与剪力滞后的半解析公式,使用时采用类似于有限条法的步骤计算,但输入数据和运算时间却很少。该方法兼有解析法精确条理与数值法方便灵活的特点,可推广应用于高层筒体结构和带有曲线预应力钢索的箱形梁桥等。     

中国数字经济发展水平:时空特征、动态演化及影响因素

基于构建的数字经济发展水平评价指标体系与2010~2018年全国30个省市(除西藏、港澳台)的面板数据,对中国数字经济发展水平的时空特征、动态演化与区域差异原因进行探究。研究发现:全国及三大区域的数字经济发展水平均呈现稳步上升态势,并伴有明显的空间相关性、空间集聚性和区域差异性,且东部相较于中西部区域内差异更大。数字经济发展速度动态演化显示,整体上中国各省市数字化发展水平变化速度状态表现为上升趋势,相较于中西部,东部拥有更大的速度变化状态。地区前期数字化基础、经济发展的一阶滞后、政府科技投入均会促进区域数字经济的发展,对外开放水平会抑制数字经济发展,地区规模对数字经济的影响表现为非线性。此外,不同线性影响因素在不同区域内对数字经济发展水平具有不同的影响力。     

考虑残值变化和消费者低碳偏好的生产定价与销售激励机制

在消费者低碳偏好和产品残值变化下,研究制造商的碳减排、生产及定价联合决策、以及对销售商的销售激励契约设计问题。不同于以往的研究假设残值不变,本文考虑残值依赖于清仓期库存以及碳减排问题。提出委托代理模型,求解模型并从理论上分析残值的变化和碳减排成本对双方决策和收益的影响。研究表明,残值变化率的增加只导致制造商的收益和生产量下降,不影响制造商的碳减排、定价、销售契约及零售商的决策和收益,但碳减排成本将导致制造商的收益和双方决策变量的下降。最后通过算例分析验证了结论,对供应链的运营实践有指导意义。     

Shape memory properties of dynamically vulcanized poly(lactic acid)/nitrile butadiene rubber (PLA/NBR) thermoplastic vulcanizates: The effect of ACN content in NBR

Morphology structure and interfacial interaction are crucial factors for shape memory thermoplastic vulcanizates. In this study, shape memory thermoplastic vulcanizates based on poly(lactic acid) (PLA) and nitrile butadiene rubber (NBR) were prepared through dynamic vulcanization. The influence of acrylonitrile (ACN) content on the morphology, compatibility, shape memory property, and mechanical property was investigated. A co‐continuous structure was observed. The interfacial compatibilization between PLA and NBR phases occurred, resulting in a significantly improved interface adhesion and interfacial interaction, which was confirmed by Fourier transform infrared spectroscopy. With such a novel structure, the PLA/NBR TPVs owned an excellent shape memory property and further improved with increasing ACN content of NBR, which could be explained that the cross‐linked continuous NBR phase provided a stronger recovery driving force. In the meantime, tensile strength and elongation at break of TPVs increased with increase in ACN content. It is concluded that the preparation of dynamically vulcanized thermoplastic vulcanizate with co‐continuous structure and strong interfacial adhesion is beneficial to obtain outstanding shape memory effect.